JVC SP-THS77F, XV-THS77 Operating the VCR, Operating the DBS tuner or Catv converter, Release

Operating external components with the remote control

See page 12 for button locations.

Operating the VCR

7To set the manufacturer’s code

You can operate a JVC VCR without setting the manufacturer’s code.

1 Slide the remote control mode selector to VCR/DBS.

2 Press VCR.

3 Press and hold VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Press 0, then 7.

For a NEC VCR:

Press 2, then 5.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a

VCR;

Set the remote control mode selector to

VCR/DBS.

The following buttons are available:

VCR/DBS: Turns VCR on and off.

3(play button): Starts playback.

y: Fast forwards video tape.

1: Rewinds video tape.

REC: Press this button together with 3 (play button) to start recording or together with 8 to pause recording.

CHANNEL +/–: Changes the TV channels on the VCR.

Operating the DBS tuner or CATV converter

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR/DBS.

2 Press DBS.

3 Press and hold VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a GI Jerrold product:

Press 0, then 1.

For a Sony product:

Press 2, then 0.

6 Release VCR/DBS.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the DBS tuner or CATV converter.

IMPORTANT

Before using the remote control to operate a DBS tuner or CATV converter;

1 Set the remote control mode selector to

VCR/DBS.

2 Press DBS.

The following buttons are available:

VCR/DBS: Turns DBS tuner or CATV converter on and off.

CHANNEL +/–: Changes the channels.

1-10, 0, +10 (100+): Selects the channel.

NOTE

When operating a VCR or DBS tuner/CATV converter;

•The source setting of VCR or DBS D remains after you have changed the remote control mode selector to AUDIO or TV. When operating VCR or DBS tuner/CATV converter again, it is not necessary to press VCR or DBS after setting the remote control mode selector.