Description of the remote control
REMOTE CONTROL
Inserting the batteries
•Slide the cover as shown in figure.
•Insert two new batteries (not rechargea- ble) making sure the (+) and
correct positions.
•Put the cover back on, letting it slide into its original position.
•The Display will show all of the remote con- trol's symbols for several seconds.
Note: WE SUGGEST USING ALKALINE BATTE-
RIES (LR03).
If the remote control is to be replaced or thrown away, the batteries must be remo- ved and disposed of in accordance with the current laws as it represents an environ- mental hazard.
When the remote control unit batteries are replaced, the 
and heating indicator 
will flash alterna- tely on the remote control unit liquid crystal display.
To set the remote control unit correctly, while
is displayed, press any button.
If you do not press a button within 12 seconds, the remote control unit will also make the
heating 
mode available, despite the fact that this function is not available with this appliance.
PROPER USE
•Point the remote control unit towards the
•Maximum distance: about seven (7) metres (without any obstacle between
remote control and receiver).
• The remote control must be handled with great care: do not drop it, expose it to direct sunlight, or leave it close to heat sources.
30
