Description of the remote control/
Electrical connection
IL DISPLAY
Signal transmission
Air conditioning indicator
Dehumidifying indicator
Fan indicator
Heating indicator (mode not available
with this appliance)
SUPER air conditioning indicator
SMART indicator
SLEEP indicator
Automatic fan speed
High fan speed
Medium fan speed
Low fan speed
High
Regulates temperature in SMART or
Dehumidifying mode.
Low
A.MODE button
Selects the operating mode (air conditio- ning, dehumidifying, fan).
B.ROOM TEMPERATURE buttons
Set room temperature or programme the timer.
C.FAN button ( 
)
Sets fan speed to automatic, high, medium or low in sequence.
D.TIMER button
Sets or cancels the timer.
E.SMART button ( 
)
When this button is pressed, the appliance automatically establishes the most suita- ble operating mode for maximum comfort.
F.SUPER button ( 
)
Starts or stops rapid cooling (in the rapid cooling mode, the fan operates at high speed with the temperature automatical- ly set at 18°C).
G.SLEEP button ( 
)
Sets or cancels the automatic SLEEP func- tion.
H.SWING button (wall mounted models only) Starts or stops swing of the air distribution vertical adjustment fins and sets the requi- red air flow direction upwards or downwards.
I.ON/OFF button
Press this button to turn the appliance on and off. NB: the settings are displayed even when the air conditioner is off.
ELECTRICAL CONNECTION
Before plugging in check that:
•the mains supply corresponds to the value shown in the specifications table;
•the socket and the mains lead correspond to the power requirements of the appliance;
•the socket is suited to the plug otherwise have the socket replaced;
•the socket is properly grounded. The manufactures cannot be held responsible for any dama- ges due to failure in following normal safety procedures.
Replacement of the power cable must be carried out by qualified personnel.
28
