Pre p a ra t i o n fo r u s e
HOW TO USE THE AIRCONDITIONER WITH WATER
These air conditioners can use both air and water to cool the condenser (the hot part) of the air conditioner.
To utilise the full potential of your air conditioner, the tank 8 needs to be filled with water. The water is used. To increase the cooling power and reduce the noise level and energy consumption of the air conditioner. The water that is used in then expelled from the machine as water vapour through the exhaust hose 16 (it does not go into room).
Always use clean top water (which doesn’t contain salts). As a rule the water will usually last about 8 hours however this depends on the conditions within the room, such as temperature, humidity, insula- tion and aspect and number of people. In turbo mode the water will also be used more quickly.
You may also use the airconditioner on air cooling only (without filling the water tank . If you only requi- re the lower cooling power.
2
A)To open the front panel 6 grip either side of the
panel and gently pull the panel towards you and upwards. Remove the tank
8Lifting it forward.
B)Turn the tank upside down and remove the plug, remove the extendible tube and fill the tank, lea- ving it on the ground.
C)After completing the fil- ling procedure, replace the extendible hose, replace the cap and screw it in tightly. Return the tank to its place, with the writing FRONT clearly visible. Carefully hold the panel in the centre and lower to its closed posi- tion.
During the "water functioning" operation and in particularly silent locations (eg the bedroom) a slight gurgling sound may be heard. This is completely normal.
IMPORTANT: if the room temperature is 32°C or over the airconditioner must be operated with with water in the tank.
26
