Kyocera FS-6970DN manual Installing in Custom Mode with a Network Connection

Installation

9

10

On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings.

Note: If the Hardware Installation warning dialog box appears, click Continue Anyway.

The Installation Completed page appears displaying the following driver options.

Print a test page

This selection verifies a connection with the printer and creates a print out of the installed driver components.

Show Quick Print Tab

This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in the Device Settings tab.

Enable Status Monitor

The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab.

When the installation completes successfully, click Finish to exit the installation wizard and return to the Product Library CD menu.

Software installation failures generate the following message:

One or more software installations have failed.

Click Finish, and retry the installation. If the same message appears again, contact your system administrator.

The installation of the printer is now complete. If prompted, restart your computer.

Installing in Custom Mode with a Network Connection

1

2

3

This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection.

Ensure that your printer and computer are connected to a network.

On the Installation Method page, select Custom Mode.

The Discover Printing System page appears displaying Discover selected. For an Express Installation, you can let Discover find your printing system, and proceed with the steps in Express Installation. Otherwise, you can choose Custom select, and click Next to continue with a custom installation.

4

5

On the Printer Port page, select the port connected to your printing system, or add a port connected to your system by clicking Add Port. Click Next.

On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next.

KX DRIVER 1-5