Installing in Custom Mode with a Parallel Connection

Installation

On the Printer Settings page, you can assign a name for the printing system. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next.

On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings.

Note: If the Hardware Installation warning dialog box appears, click Continue.

The Installation Completed page appears displaying the following driver options.

Print a test page

This selection verifies a connection with the printer and creates a print out of the installed driver components.

Show Quick Print Tab

This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in the Device Settings tab.

Enable Status Monitor

The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab.

Device Settings

Select Device Settings to open the Device Settings tab where you can choose installed options for your printing system. (In Windows 7 and Windows Vista, the Device Settings check box is not displayed.)

When the installation completes successfully, click Finish to exit the installation wizard and return to the Product Library CD menu.

Software installation failures generate the following message:

One or more software installations have failed.

Click Finish, and retry the installation. If the same message appears again, contact your system administrator.

The installation of the printer is now complete. If prompted, restart your computer.