TIMER | SLEEP |
| MAINTENANCE | ||
|
|
|
|
|
|
|
|
|
|
|
|
To switch off the TIMER
1Press CLOCK/TIMER for more than 2 seconds (or TIMER on the remote control).
2Press STOP on the system to cancel the timer.
ªThe timer is now switched off.
ªThe display will show "TIMER OFF" and the TIMER flag disappears.
To start the TIMER again (for the same
preset time and source)
1Press CLOCK/TIMER for more than 2 seconds (or TIMER on the remote control).
2Press CLOCK/TIMER again to store the start time.
ªThe timer is now switched on.
ªThe TIMER flag appears on the display.
Sleep (only on remote control)
This feature allows you to select a length of time after which the system will switch to the standby mode automatically.
•Press SLEEP on the remote control repeatedly to select a period of time.
ªThe selections are as follows (time in minutes):
60 ª 45 ª 30 ª 15 ª OFF ª 60 …
ª“SLEEP XX” or “OFF” will be displayed. "XX" is the time in minutes.
•When you reach the desired length of time, stop pressing the SLEEP button.
ªAfter this amount of time passes, the system will switch to the standby mode.
To switch off the sleep timer
•Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY•ON button.
Maintenance
Cleaning the Cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.
•Do not use solvents such as benzine,
thinner, commercially available cleaners, or antistatic spray intended for analog records.
Cleaning the CD lens
•After prolonged use, dirt or dust may accumulate at the CD lens. To ensure good playback quality, clean the CD lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
•To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation.
•Use a cotton swab slightly moistened with cleaning fluid or alcohol.
•You can also clean the heads by playing a cleaning tape once.
Demagnetizing the heads
•Use a demagnetizing tape available at your dealer.
English
25
