USING THE IR REMOTE CONTROL
IR Remote Control Key Mapping
Each input and output on the 16x16 3GSDI Push Button Matrix is represented by a button on the IR Remote Control unit. The table below lists the corresponding inputs and outputs.
Remote Button | Monitor / Source |
1 | 1 |
2 | 2 |
3 | 3 |
4 | 4 |
5 | 5 |
6 | 6 |
7 | 7 |
8 | 8 |
9 | 9 |
10 | 10 |
11 | 11 |
12 | 12 |
13 | 13 |
14 | 14 |
15 | 15 |
16 | 16 |
Routing Sources using the IR Remote Control unit
Issuing a routing command is a two step process. The first step is to select the monitor where the source will be routed. The second step is to select the source.
Example
Route the source device connected to In 12 to the monitor connected to Out 9.
1.Press button 9 (monitor 9) on the IR remote control unit.
2.Press button 12 (source 12) on the IR remote control unit.
The source connected to In 12 will be routed to the 3GSDI destination (display) connected to Out 9.
21
