Gefen 1080P manual Connecting 16X16 3GSDI Push Button Matrix

CONNECTING THE

16X16 3GSDI PUSH BUTTON MATRIX

How to Connect the 16x16 3GSDI Push Button Matrix

1.Connect up to 16 3G-SDI source devices to the 3G-SDI inputs on the rear panel of the 16x16 3GSDI Push Button Matrix using SDI cables.

2.Connect up to 16 3G-SDI displays to the 3G-SDI outputs on the rear panel of the 16x16 3GSDI Push Button Matrix.

3. Connect the included power cord to the power input receptacle on the rear panel of the 16x16 3GSDI Push Button Matrix. Connect the opposite end of the cable into a open wall power socket.

How to Operate the 16x16 3GSDI Push Button Matrix

The 16x16 3GSDI Push Button Matrix offers a number of control options. The following options can be used to control basic routing commands of the 16x16 3GSDI Push Button Matrix:

1.Front Panel Control Buttons - Pages 10 - 17.

2.IR Remote Control - Pages 18 - 21.

3. RS-232 Serial Control - Pages 22 - 29.

4.IP Control - Pages 30 - 33.

Wiring Diagram for the GefenPRO 16x16 3GSDI Push Button Matrix

SDI CABLE

RS-232 CABLE

ETHERNET CABLE

16x

3G-SDI Sources

Matrix

RS-232 Controller

Computer
(IP Control)	16x
	3G-SDI Displays

WARNING: This product should always be connected to a grounded electrical socket.

8