English-51
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Record
(Device_Name) Menu
(Device_Name) Operation
Connect (Device_Name)
Receiver
Setup
Switches from Anynet+ to TV broadcast mode.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Your TV connects to the corresponding device.
Sound is output through the receiver (home theater). Aaudio stream in HDMI is one way
only from Device to TV. But there’s SPDIF output in TV. So TV sound can be sent to HT.
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using
Anynet+.
Description
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Device with built-in Tuner
Audio Device
Anyview2
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
After switching to the device, while playing a file
After switching to the device, when you are watching
a TV program
When Receiver is activated
When watching TV
Numeric buttons
…/†/œ/√/ENTER buttons
Color buttons
EXIT button
œœ(Backward search)
√√(Forward search)
■(Stop)
√»(Play/Pause)
CH …/†button
VOL+/- button
MUTE button
√»(Play/Pause)
Operating Status Available Buttons
➢
The Anynet+ function only works when the remote control is set to TV.
➢
The REC button works only while in the recordable state.
➢
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote
control.
➢
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
➢
The Anynet+ functions don’t operate for the products from other manufacturers.
➢
The Anynet+ functions do not work withother manufacturers’products.
➢
The
œœ
,
√√
operations may differ depending on the device.
RecordingYou can make a recording of a TVprogram using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➢
You can also record the source streams by selecting Recordafter pressing the Anynet+ button.
➢
The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the
device is recorded.
➢
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.