Samsung PL-42Q91HP, PL-50Q91HP, PL-50C91H, PL-42C91HP Connecting a VCR, Connecting an S-VHS VCR

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9-10). Skip step 1 if you have not yet connected to an antenna or a cable system.

TV Rear Panel

VCR

5 Audio Cable (Not supplied)

2

4 Video Cable (Not supplied)

3Antenna Cable (Not supplied)

➢Each VCR has a different back panel configuration.

➢When connecting a VCR, match the color of the connection terminal to the cable.

➢The illustration for connecting jacks on the rear shown in this manual has been created based on the PL-42C91HP model. Even though the jack configuration is different from your model, the connection method is the same as in the illustration.

1.Unplug the cable or antenna from the back of the TV.

2.Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3.Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4.Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.

5.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.

➢If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Side Panel TV Rear Panel

VCR

3 Audio Cable (Not supplied)

2 S-Video Cable (Not supplied)

1 Antenna Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

➢Each S-VHS VCR has a different back panel configuration.

➢When connecting an S-VHS VCR, match the color of the connection terminal to the cable.

➢Some games may be displayed with a cut off picture when the TV is connected to a game player.

➢The illustration for connecting jacks on the rear shown in this manual has been created based on the PL-42C91HP model. Even though the jack configuration is different from your model, the connection method is the same as in the illustration.

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV.

English-11