Setting up the TV with your PC

How to Auto Adjust

Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

➢This function does not work in DVI-Digital mode.

➢Change to the PC mode first.

T V	Setup
	More
	PC
	Home Theater PC	: Off
	Light Effect	: Standby Mode On
	Energy Saving	: Off
	Screen Burn Protection
	HDMI Black Level	: Normal
	More
	Move	Enter	Return

T V		PC
	Image Lock
	Position

Auto Adjustment

Image Reset

1.Press the MENU button to display the menu.

Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “PC”, then press the ENTER button.

2.Press the … or † button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjustment in progress. Please wait.” appears on the screen and the picture adjustments are automatically activated.

Press the EXIT button to exit.

Move Enter Return

Auto Adjustment in progress.

Please wait.

Adjusting the Screen Quality

The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen.

➢Change to the PC mode first.

T V

Image Lock

Position

Auto Adjustment

Image Reset

Move	Enter	Return
T V	Image Lock
Coarse		50
Fine		0

1.Press the MENU button to display the menu.

Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “PC”, then press the ENTER button.

2.Press the ENTER button to select “Image Lock”.

3.Press the … or † button to select “Coarse” or “Fine”, then press the ENTER button. Press the œ or √ button to adjust the screen quality, then press the ENTER button.

Press the EXIT button to exit.

➢ This feature may change the width of the image. If necessary, adjust the position to center.

Move Enter Return