Whirlpool W10096993A - SP VACATION, Storage Moving Care, Changing the Drum Light On Some Models

Page 9

CLEANING THE LINT SCREEN

2.Push the lint screen firmly back into place.

IMPORTANT:

nDo not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

nIf lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load is completely dry. The screen is probably clogged if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months, or more frequently, if it becomes clogged due to a residue buildup.

To wash:

1.Roll lint off the screen with your fingers.

2.Wet both sides of lint screen with hot water.

3.Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4.Rinse screen with hot water.

5.Thoroughly dry lint screen with a clean towel. Reinstall screen in dryer.

VACATION, STORAGE,

AND MOVING CARE

Non-Use or Storage Care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

1.Unplug dryer or disconnect power.

2.(For gas dryers only): Close shut off valve to gas supply line.

3.Clean lint screen. See “Cleaning the Lint Screen.”

Moving Care

For power supply cord-connected dryers:

1.Unplug the power supply cord.

2.Make sure leveling legs are secure in dryer base.

3.Use tape to secure dryer door.

For direct-wired dryers:

1.Turn off power at fuse or breaker box.

2.Disconnect wiring.

3.Make sure leveling legs are secure in dryer base.

4.Use tape to secure dryer door.

For gas dryers:

1.Unplug or disconnect power to dryer.

2.Close shutoff valve in gas supply line.

3.Disconnect gas supply line pipe and remove fittings attached to dryer pipe.

4.Cap the open fuel supply line.

5.Make sure leveling legs are secure in dryer base.

6.Use tape to secure dryer door.

Reinstalling the Dryer

Follow the “Installation Instructions” to locate, level, and connect the dryer.

CHANGING THE DRUM LIGHT

(ON SOME MODELS)

1.Unplug dryer or disconnect power.

2.Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Using a 1/4" nut driver or socket wrench, remove the screw located in the lower right-hand corner of the cover. Remove the cover.

3.Turn bulb counterclockwise. Replace the bulb with

a 10-watt appliance bulb only. Replace the cover and secure with the screw.

4.Plug into a grounded outlet or reconnect power.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Table des matières Dryer Safety Page Check Your Vent System for Good AIR Flow Good air flowMaintain good air flow by Control Panel & Features Timed DRYAutomatic DRY Items to dry Dryness Level Temperature Cycle Details Setting the Drying TemperatureItems to dry Cycle Temperature Cycle Details Cycle Guide Automatic DRY CyclesClean the lint screen Using Your DryerLoad the dryer Select the desired cycleCleaning the Dryer Interior Cleaning the Dryer LocationCleaning the Lint Screen Dryer CareChanging the Drum Light On Some Models VACATION, Storage Moving CareIf you experience Possible Causes Solution TroubleshootingTroubleshooting Items Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Representations Outside of WarrantySécurité DE LA Sécheuse Page Nettoyer le filtre à charpie avant chaque charge Circulation d’air adéquateTemperature température Tableau DE Commande ET CaractéristiquesTimed DRY séchage minuté Automatic DRY séchage automatiqueGuide DE Programmes Programmes DE Séchage Automatique VERY/MORE DRY TRÈS/PLUS SECRéglage de la température de séchage Nettoyer le filtre à charpie Utilisation DE LA SécheuseCharger la sécheuse Sélectionner le programme désiréEntretien DE LA Sécheuse Nettoyer L’EMPLACEMENT DE LA SécheuseNettoyage DE L’INTÉRIEUR DE LA Sécheuse Retirer LA Charpie AccumuléeNettoyer LE Filtre À Charpie Réinstallation de la sécheuseEntretien en cas de non-utilisation ou d’entreposage Précautions à prendre avant un déménagementChangement DE LA Lampe DU Tambour SUR Certain Modèles DépannageChangement DE LA Lampe DU Tambour suiteDépannage Éléments Exclus DE LA Garantie Garantie LimitéeLa présente garantie limitée ne couvre pas Exonération DE Responsabilité EN Dehors DE LA GarantieFor Estate, or 800-447-6737 for Roper For Amana, 800-688-9920 for Admiral

W10096993A - SP, W10096991A specifications

The Whirlpool W10096991A and W10096993A models stand out as innovative additions to the realm of home appliances, specifically designed to enhance functionality and convenience in modern kitchens. Although they are primarily known for their efficiency and user-friendly features, it’s their blend of technology and design that truly distinguishes them in the market.

One of the prominent features of these two models is their adaptability, which allows them to cater to various cooking needs. This flexibility is reflected in their multifunction capabilities, making them suitable for baking, roasting, and even grilling. This versatility means that users can prepare an array of dishes without the need for multiple appliances, thus saving space and energy in the kitchen.

In terms of technology, the Whirlpool W10096991A and W10096993A incorporate advanced cooking systems that deliver consistent and precise results. The units leverage an innovative sensor cooking mechanism that automatically adjusts cooking time and power based on the type of food being prepared. This feature takes the guesswork out of cooking and ensures that meals are cooked to perfection.

Energy efficiency is another significant characteristic that makes these models appealing to eco-conscious consumers. With a focus on reducing energy consumption without compromising performance, the Whirlpool appliances are engineered to meet stringent energy guidelines. This commitment to sustainability not only benefits the environment but also translates to lower utility bills for homeowners.

User convenience is further enhanced through intuitive controls and smart technology. The models come equipped with easy-to-navigate digital interfaces that allow users to set cooking parameters effortlessly. Additionally, some models may feature Wi-Fi connectivity, enabling remote operation via smartphone apps. This connectivity means users can monitor their cooking progress and make adjustments from anywhere in the home.

Cleaning and maintenance are other critical aspects for users, and both models are designed with ease of cleaning in mind. They typically feature non-stick interiors and removable components, making post-cooking cleanup straightforward and hassle-free.

The design of the Whirlpool W10096991A and W10096993A also deserves mention. With sleek aesthetics and modern finishes, they easily integrate into contemporary kitchen décor. Their compact size ensures they fit into various kitchen layouts while offering substantial cooking space within.

In summary, the Whirlpool W10096991A and W10096993A offer a combination of versatility, performance, and style, making them excellent choices for anyone looking to upgrade their kitchen appliances. With advanced technology that simplifies cooking and energy-efficient designs that meet the needs of the modern consumer, these models provide an exceptional cooking experience that is both convenient and efficient.
Top Page Image Contents