Whirlpool 8178023 manual Default Cycle Settings, Timed Cycles

DEFAULT CYCLE SETTINGS

Automatic Cycles

CYCLE 1, 2	EXHAUST TEMP 3	AUTO DRY TIME/	OPTIONS / MODIFIERS
(LED TEMP)	TRIP / RESET	DRYNESS DEFAULT
Heavy Duty	155˚F / 145˚F	39 minutes, Normal Dry
(High)			Auto Dry Level — factory default is
Towels / Cotton	155˚F / 145˚F	45 minutes, Normal Dry	Normal Dry, retain the last used setting
(High)			on a per-cycle basis
Normal	150˚F / 138˚F	34 minutes, Normal Dry	Wrinkle Shield — factory default is
(Medium Dry)			On for the Casual cycle, and Off for all
Bulky Items	140˚F / 128˚F	60 minutes, Normal Dry	other cycles, retain the last used setting
(Medium)			on a per-cycle basis
Casual	125˚F / 115˚F	36 minutes, Normal Dry	Cycle Signal — factory default is
(Low)			Softer, retain the last used setting per
Delicate	115˚F / 105˚F	22 minutes, Normal Dry	run.
(Extra Low)

Notes:

1) Temperature is not user-adjustable in automatic cycles.

2) Some automatic cycles may start at a higher temperature and then adjust to the displayed temperature later in the cycle.

3) The default temperatures are for reference only. The actual temperature is adaptive and variable and may not fall

within the ranges listed.

Timed Cycles

CYCLE	TIME	TEMPERATURE	OPTIONS / MODIFIERS
Timed Dry	45 minutes factory default	Medium factory default, user	Auto Dryness Level — only available
	user selectable, retain last	selectable, retain last setting	in automatic cycles
	setting per run	per run	Wrinkle Shield — factory default Off,
Rack Dry	60 minutes default, user	Air default, user selectable,	retain last used setting on a per-cycle
	selectable, not retained	not retained	basis, not available in Rack Dry cycle
Touch Up	20 minutes default, user	Medium High default, user	Cycle Signal — factory default is Softer,
	selectable, not retained	selectable, not retained	retain last used setting per run

Notes:

TIMED CYCLES - Default times and temperatures are selectable.

WRINKLE SHIELD - Selectable in all cycles except Rack Dry. A valid user input results in one (1) BEEP. An invalid

user input results in three (3) beeps.

3