Whirlpool WGD94HEAC manual Cycle Guide Manual Cycles, Cycle Guide Steam Cycle

Cycle Guide – Manual Cycles

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

	Cycle:	Drying	Default	Available
Items to dry:		Temperature:	Time:	Options:	Cycle Details:
Small loads and	Quick Dry	High	13	Wrinkle Shield™†	For small loads of 3–4 items.
sportswear		Medium
		Low
		Extra Low
		Air Only
Any load	Timed Dry	High	40	Wrinkle Shield™†	Use to dry items to a damp level for items that do
NOTE: Select Air		Medium			not require an entire drying cycle. Select a drying
Only to dry foam,		Low			temperature based on the type of fabrics in your
rubber, plastic, or		Extra Low			load. If you are unsure of the temperature to select
heat-sensitive		Air Only			for a load, select the lower setting rather than the
fabrics.					higher setting.

†You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.

Cycle Guide – Steam Cycle

Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Items to	Cycle:	Drying	Default	Available
refresh:		Temperature:	Time:	Options:	Cycle Details:
Shirts, blouses,	Steam Refresh	High	22	Wrinkle Shield™†	Use to reduce odors and light wrinkles.
and slacks		Medium		Static Reduce	Do not add dryer sheets.

†You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle.

Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely.

9