JVC LVT1150-003B manual Speaker layout, Connecting a TV, To connect a TV with the Scart connector

Page 18

Connections

Speaker layout

 

Center speaker

Front left

 

 

Front right

speaker

 

 

speaker

Powered subwoofer

Surround left

 

 

Surround right

speaker

 

 

speaker

 

Wireless receiver unit

NOTE

Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distance between the speakers and the TV.

The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay attention to the following when installing the speakers.

When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait

at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

Place the satellite speakers on a flat and level surface.

Be sure to place the powered subwoofer to the TV’s right. If you place the powered subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Do not locate the wireless receiver unit too close to the center unit. Doing so may cause noise over the radio reception.

Connecting a TV

Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.

You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (A pg. 38)

7To connect a TV equipped with the component video input jacks

Center unit

 

TV

COMPONENT VIDEO OUT

 

 

 

 

 

 

 

 

Y

PB

PR

 

 

 

 

 

 

 

 

 

To component video input

Component video cord (not supplied)

NOTE

If your TV supports progressive video input, you can enjoy a high

quality picture by setting the progressive scan mode to active. (A pg. 19)

If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

The component video signals can be output only when you select “DVD” as the source to play. (A pg. 18)

7To connect a TV with the SCART connector

Center unit

TV

AV

To SCART connector*

SCART cable (not supplied)

*Some TV’s SCART connectors output audio signal. In such a case, you can enjoy the TV sound through this system.

NOTE

No sound signal comes out from “AV” (SCART) connector.

Select the appropriate scan mode according to your TV. See “Changing the scan mode” (A pg. 19).

13

Image 18
Contents Consists of XV-THSW9, RX-THSW8 SP-PWSW9, SP-THS9F, SP-THS9C Consists of XV-THSW8, RX-THSW8 SP-PWSW8, SP-THS5F, SP-THS5CImportant for the U.K Wall or 20 cm Wall or15 cm 15 cm Wall or obstructions FrontSafety Instructions Above ALLImportant for Laser Products Table of contents Introduction Supplied accessoriesSafety precautions Important cautionsDiscs you can play About discsPlayable disc types Region code of DVD VideoAbout discs Rear panel center unit Description of parts and controlsFront panel center unit Display windowWireless receiver unit Powered subwooferDo not block the ventilation openings Operating the system from the remote control Remote controlPutting batteries in the remote control R6P SUM-3/AA 15F type dry-cell batteries suppliedFM antenna Connecting AM MW loop antennaConnections If reception is poorAssembling the front and surround speakers Before assemblingCompletion Wired connection Connecting the satellite front, center, surround speakersBefore connecting the speaker cords Twist and pull the insulation coat off and removePowered subwoofer 10 m Wireless receiver unitCenter unit See Wrls CH in Sound and other settings a pg Setting up the wireless receiver unitExample When the channel 4 is selected Fully extend the telescopic antenna uprightCenter unit To Scart connector Scart cable not supplied Connecting a TVTo connect a TV with the Scart connector Speaker layoutConnecting to a digital component Connecting the powered subwooferConnecting to an analog component Connecting the power cordRelease F TV Operating external components with the remote controlOperating the TV To set the manufacturer’s codeRelease F VCR Operating external components with the remote controlOperating the VCR See page 15 for button locationsPress F Audio Basic operationsTurning the system on/off Press FAdjusting the brightness of the indications Dimmer Adjusting the volume VolumeListening with headphones not supplied Selecting the source to playSleep Timer Sleep Adjusting the treble sound TrebleChanging the scan mode Optimizing the speaker settings Smart Surround Setup Setting UP flashes on the display windowWhen Failed ! appears on the TV screen Playback Basic playbackJpeg disc Playback information on the display windowMP3/WMA disc MPEG4 discOne Touch Replay Fast-forward/fast-reverse searchSkip to the beginning of a desired selection Press Title Locating a desired title/ group using number buttonsPlaying back a bonus group Select the bonus groupAuto Surround Auto Surr Using the surround modeAdvanced operations Dolby SurroundPress SURR. repeatedly to select the desired mode Using the on-screen barSelecting the surround mode Showing the on-screen barContents of the on-screen bar during playback Changing the time informationPress on Screen twice Playing from a specified position on a disc Locating a desired scene using a VCD/ Svcd menu with PBCLocating a desired chapter/track using the on-screen bar Locating a desired scene from the DVD menuLocating a desired position by specifying the time Using the file control displayTo cancel a misentry Beginning of the discResume Playback Selecting the subtitleSelecting a view angle Frame-by-frame playback Selecting the audioSpecial picture playback Playing back in slow-motionChanging the VFP setting Selecting browsable still picture recorded on DVD AudioZooming Press Cursor Y/5 to change the setting Press Enter Repeat steps 3 to 6 to adjust other parameters Press VFPProgram Playback Repeating the current selection Random PlaybackRepeat Playback Press RepeatTray lock Repeating a desired part A-B RepeatPress Cursor 3/2 to make an adjustment or selection Sound and other settingsPress Setting Press Cursor Y/5 to select the item you want to setSetting DVD preferences Using the setup menusMenu description Speaker setting menu Picture menu PictureAudio menu Audio Other setting menu Others This case, set the distance of each speaker as followsCountry/Area codes list for Parental Lock Manual tuning Preset tuningTuner operations Press FM Mode Selecting the FM reception modeUsing the RDS Radio Data System when receiving FM stations Reducing the noise of AM MW broadcastPress PTY Search again To search for a program using the PTY codesPress PTY Search while listening to an FM station To continue searching after the first stopNews Switching to broadcast program of your choice temporarilyHow the Enhanced Other Network function actually works InfoCleaning the system MaintenanceTroubleshooting ReferencesCenter unit XV-THSW9/XV-THSW8 SpecificationsWireless receiver unit RX-THSW8 Subwoofer SP-PWSW9/SP-PWSW8Front speakers SP-THS5F Surround speakers SP-THS7SCenter speaker SP-THS5C

LVT1150-003B specifications

The JVC LVT1150-003B is a versatile and high-performance speaker designed to enhance your audio experience. Known for its impressive sound quality and robust construction, this speaker has become a popular choice among audio enthusiasts.

At the heart of the LVT1150-003B is its advanced speaker technology. Featuring a high-efficiency design, it ensures maximum output with minimal distortion. The speaker utilizes a 5.25-inch woofer that delivers rich, deep bass, making it ideal for music lovers who crave a powerful low-end response. Additionally, the 1-inch soft dome tweeter offers crisp and clear high frequencies, ensuring a balanced and dynamic sound profile across various music genres.

One of the standout features of the LVT1150-003B is its wide frequency response range, typically spanning from 50 Hz to 20 kHz. This capability allows the speaker to reproduce a broad spectrum of audio content, from thunderous movie explosions to delicate acoustic guitar plucking. With a sensitivity rating of around 87 dB, the speakers can deliver impressive sound levels even with modest amplification, making them suitable for both home theater setups and casual listening environments.

The design of the JVC LVT1150-003B is not only functional but also aesthetically pleasing. Its compact form factor allows it to fit seamlessly into various audio setups, whether in a small apartment or a more extensive home theater system. The speaker is equipped with a durable cabinet that minimizes unwanted resonances, further enhancing audio clarity.

Installation is made easy with versatile connectivity options. The speaker comes with standard binding posts and can be connected to any compatible audio receiver, ensuring a hassle-free setup. This flexibility in connectivity allows users to integrate the LVT1150-003B into a wide range of audio systems, from simple stereo configurations to elaborate multi-channel home theaters.

In summary, the JVC LVT1150-003B is an excellent choice for anyone looking to elevate their audio experience. With its impressive sound quality, advanced technology, and user-friendly design, this speaker delivers exceptional performance across various applications. Whether listening to your favorite music, watching movies, or gaming, the LVT1150-003B ensures an immersive and enjoyable audio experience that meets the demands of modern listeners.