JVC LVT1150-003B manual Sound and other settings, Press Setting, Off

Page 41

Advanced operations

See page 25 for button locations.

Sound and other settings

IMPORTANT

Before using the remote control for the following operation;

• Set the remote control mode selector to

AUDIO.

NOTE

Before you start operation;

•There is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

1 Press SETTING.

Example:

B A L : C E N T E R

2 Press Cursor Y/5 to select the item you want to set.

•BAL (Balance):

You can adjust the balance between the front left and front right speakers.

•DEC (Decode):

When you play an external source (AUX DIGITAL is selected as a source) that was encoded with Dolby Digital or DTS Digital Surround, the following symptoms may occur;

•No sound comes out at the beginning of playback.

•Noise comes out while searching for or skipping chapters or tracks.

AUT/PCM (Auto/PCM):

Normally select this. The system automatically detects the incoming signals.

DOLBY D: Select this if the symptoms above occur when playing a disc (or software) encoded with Dolby Digital.

DTS: Select this if the symptoms above occur when playing a disc (or software) encoded with DTS Digital Surround.

•WRLS SP (Wireless speaker):

You can activate or deactivate the wireless transmission function for the wireless receiver unit.

ON:

Select this when you connect the surround

 

speakers via the wireless receiver unit.

OFF:

Select this when you connect the surround

 

speakers to the powered subwoofer.

•WRLS CH (Wireless channel):

You can select the desired wireless channel (1, 2, 3, or 4) for the wireless receiver unit depending on the condition of the

reception. Note that the channel on the center unit and the wireless receiver unit should be the same. (A pg. 12)

3 Press Cursor 3/2 to make an adjustment or selection.

Example:

B A L : R -- 5

The adjustment is set and the display automatically disappears a few seconds later.

NOTE

•When “DOLBY D” or “DTS” is selected, if a signal encoded with another digital format comes in, you cannot listen to the sound. (The GD or C indicator flashes.)

36

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Consists of XV-THSW8, RX-THSW8 SP-PWSW8, SP-THS5F, SP-THS5C Consists of XV-THSW9, RX-THSW8 SP-PWSW9, SP-THS9F, SP-THS9CImportant for the U.K 15 cm Wall orWall or 20 cm 15 cm Wall or obstructions FrontAbove ALL Safety InstructionsImportant for Laser Products Table of contents Safety precautions Supplied accessoriesIntroduction Important cautionsPlayable disc types About discsDiscs you can play Region code of DVD VideoAbout discs Front panel center unit Description of parts and controlsRear panel center unit Display windowDo not block the ventilation openings Wireless receiver unitPowered subwoofer Putting batteries in the remote control Remote controlOperating the system from the remote control R6P SUM-3/AA 15F type dry-cell batteries suppliedConnections Connecting AM MW loop antennaFM antenna If reception is poorCompletion Assembling the front and surround speakersBefore assembling Before connecting the speaker cords Connecting the satellite front, center, surround speakersWired connection Twist and pull the insulation coat off and remove10 m Wireless receiver unit Powered subwooferExample When the channel 4 is selected Setting up the wireless receiver unitCenter unit See Wrls CH in Sound and other settings a pg Fully extend the telescopic antenna uprightTo connect a TV with the Scart connector Connecting a TVCenter unit To Scart connector Scart cable not supplied Speaker layoutConnecting to an analog component Connecting the powered subwooferConnecting to a digital component Connecting the power cordOperating the TV Operating external components with the remote controlRelease F TV To set the manufacturer’s codeOperating the VCR Operating external components with the remote controlRelease F VCR See page 15 for button locationsTurning the system on/off Basic operationsPress F Audio Press FListening with headphones not supplied Adjusting the volume VolumeAdjusting the brightness of the indications Dimmer Selecting the source to playChanging the scan mode Sleep Timer SleepAdjusting the treble sound Treble When Failed ! appears on the TV screen Optimizing the speaker settings Smart Surround SetupSetting UP flashes on the display window Basic playback PlaybackMP3/WMA disc Playback information on the display windowJpeg disc MPEG4 discSkip to the beginning of a desired selection One Touch ReplayFast-forward/fast-reverse search Playing back a bonus group Locating a desired title/ group using number buttonsPress Title Select the bonus groupAdvanced operations Using the surround modeAuto Surround Auto Surr Dolby SurroundSelecting the surround mode Using the on-screen barPress SURR. repeatedly to select the desired mode Showing the on-screen barPress on Screen twice Contents of the on-screen bar during playbackChanging the time information Locating a desired chapter/track using the on-screen bar Locating a desired scene using a VCD/ Svcd menu with PBCPlaying from a specified position on a disc Locating a desired scene from the DVD menuTo cancel a misentry Using the file control displayLocating a desired position by specifying the time Beginning of the discSelecting a view angle Resume PlaybackSelecting the subtitle Special picture playback Selecting the audioFrame-by-frame playback Playing back in slow-motionZooming Changing the VFP settingSelecting browsable still picture recorded on DVD Audio Program Playback Press Cursor Y/5 to change the setting Press EnterRepeat steps 3 to 6 to adjust other parameters Press VFP Repeat Playback Random PlaybackRepeating the current selection Press RepeatRepeating a desired part A-B Repeat Tray lockPress Setting Sound and other settingsPress Cursor 3/2 to make an adjustment or selection Press Cursor Y/5 to select the item you want to setMenu description Setting DVD preferencesUsing the setup menus Audio menu Audio Speaker setting menuPicture menu Picture This case, set the distance of each speaker as follows Other setting menu OthersCountry/Area codes list for Parental Lock Tuner operations Manual tuningPreset tuning Using the RDS Radio Data System when receiving FM stations Selecting the FM reception modePress FM Mode Reducing the noise of AM MW broadcastPress PTY Search while listening to an FM station To search for a program using the PTY codesPress PTY Search again To continue searching after the first stopHow the Enhanced Other Network function actually works Switching to broadcast program of your choice temporarilyNews InfoTroubleshooting MaintenanceCleaning the system ReferencesWireless receiver unit RX-THSW8 SpecificationsCenter unit XV-THSW9/XV-THSW8 Subwoofer SP-PWSW9/SP-PWSW8Center speaker SP-THS5C Front speakers SP-THS5FSurround speakers SP-THS7S

LVT1150-003B specifications

The JVC LVT1150-003B is a versatile and high-performance speaker designed to enhance your audio experience. Known for its impressive sound quality and robust construction, this speaker has become a popular choice among audio enthusiasts.

At the heart of the LVT1150-003B is its advanced speaker technology. Featuring a high-efficiency design, it ensures maximum output with minimal distortion. The speaker utilizes a 5.25-inch woofer that delivers rich, deep bass, making it ideal for music lovers who crave a powerful low-end response. Additionally, the 1-inch soft dome tweeter offers crisp and clear high frequencies, ensuring a balanced and dynamic sound profile across various music genres.

One of the standout features of the LVT1150-003B is its wide frequency response range, typically spanning from 50 Hz to 20 kHz. This capability allows the speaker to reproduce a broad spectrum of audio content, from thunderous movie explosions to delicate acoustic guitar plucking. With a sensitivity rating of around 87 dB, the speakers can deliver impressive sound levels even with modest amplification, making them suitable for both home theater setups and casual listening environments.

The design of the JVC LVT1150-003B is not only functional but also aesthetically pleasing. Its compact form factor allows it to fit seamlessly into various audio setups, whether in a small apartment or a more extensive home theater system. The speaker is equipped with a durable cabinet that minimizes unwanted resonances, further enhancing audio clarity.

Installation is made easy with versatile connectivity options. The speaker comes with standard binding posts and can be connected to any compatible audio receiver, ensuring a hassle-free setup. This flexibility in connectivity allows users to integrate the LVT1150-003B into a wide range of audio systems, from simple stereo configurations to elaborate multi-channel home theaters.

In summary, the JVC LVT1150-003B is an excellent choice for anyone looking to elevate their audio experience. With its impressive sound quality, advanced technology, and user-friendly design, this speaker delivers exceptional performance across various applications. Whether listening to your favorite music, watching movies, or gaming, the LVT1150-003B ensures an immersive and enjoyable audio experience that meets the demands of modern listeners.
Top Page Image Contents