JVC SP-THC60F, SP-THC60S manual Assemblingthespeakers-- TH-C60TH-CSO, For TH-C60, For TH-CSO, Stand

Connections	[	Donot connectthe powercord untilallother connectionshavebeenmade.					]
		Before		assembling	--
		•	Prepare a Phillips		screwdriver (not	supplied).
		•	Take	care not to	drop any component	part while assembling;
			otherwise, it may cause damage to the floor or injur_,c

•Assemblingthespeakers-- TH-C60_TH-CSO

•For TH-C60: Assemble front speakers and surround speakers.

•For TH-C50: Assemble front speakers.

For the surround speakers of TH-C50, see "Connecting the surround speakers -- TH-C50". (See page 10.)

For TH-C60

		B
Front speaker	Surround	Stand (4)	Base plate (4)
(SP-THC6OF)(2)	speaker
	(SP-THC60S) (2)

•Check file model name of each speaker from the label on the rear to locate eacll speaker correctly.

For TH-CSO

'_"g'peaker

_Stand

I _,,, (2) Screw MS x 40 mm/M5 x 1-5/8

I \42 ch°s/supp'°dl

2 stand:

@: Use these screws (M4 x

45 mm/M4 x 1-13/16 inches) when assembling the speaker

the base plate.

Front speaker	Stand (2)	Base plate (2)
(SP-THC6OF)(2)

Stand (or speaker directly) _

Base plate

Screw M4 x 20 mm/M4 x 13/16 inches (supplied) _

Assembled speakers

or

With stand: Refer to steps 1 to	Without stand: Refer to steps
3.	2 and 3.

When assembling the speaker with the base plate, use the screws @.

f

Red White

You can route the speaker cord by using speaker cord clamp (supplied).