Whirlpool LE4930XT, LE4900XT Starting Your Dryer, Select a Cycle Set, Push Start Button, Restart

Page 4

Operating instructions

Starting Your Dryer

Before starting your dryer, be sure laundry IS sorted and loaded properly (see your”Dryer Guide”) Be sure the door is tightly closed.

1. Select a CYCLE	2	Set
		. TEMPERATURE SELECTOR

Turn the Control Knob			either	way	to	The	dryer	WIII start tumbling when
point to the	cycle	and	time	setting	you	you	push	the START Button
want
3. Push	the	START Button				To stop		and restart
3. Push	the	START Button				the	dryer

To stop the dryer, open the door (or turn the Control Knob to OFF] To restart the dryer, close the door, select cycle, if necessary. and push

START

The setting can be changed at any time by turning the Control Knob to a new setting

The Cycle Control Knob should point to an OFF area when the dryer

is not in use. If the dryer is stopped before the cycle is finished, turn the Cycle Control Knob to an OFF area.

4

Image 4

Contents Automatic Dryers Contents Additional Safety InstructionsStarting Your Dryer Select a Cycle SetPush Start Button RestartSelecting a Cycle Drying timesEnd-of-cycle signal Load SizesMixed loads Mixed Load Heavy Work Clothes TowelsLint Screen Electric DryersCleaning dryer interior Optional Installation Accessories Kxation careVoltage Requirements GAS DryersIf Your Dryer does not RUN Before calling for AssistanceIf Drying Time Seems Long If you need service+ If you need FSP’ replacement parts‘‘If you need As&stanceJ If you have a prbblem?Warranty