Lint | screen |
|
|
| |
|
| The | lint screen | ||
|
| is inside | the | dryer | |
|
| drum, | on | the | |
|
| back | wall. | Clean | |
|
| it before | each | ||
|
| load. | A screen | ||
|
| blocked | by lint | ||
Pull | straight | can increase | |||
| out. | drying | time. | ||
|
|
|
|
| |
1.Use the finger holes to pull the lint screen straight out
2.Lightly squeeze the body, as shown, while pulling the cover off
3.Roll lint off the screen with your fingers DO NOT rinse or wash the
screen. Wet I lint is hard to
remove. | Squeeze body; |
| pull cover off. |
4.Replace the cover on the body of the lint screen
5.Push the lint screen straight back in until it clrcks into place
Lint removal
Lint can gather inside the dryer and cre tate a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.
ELECTRIC DRYERS | GAS DRYERS |
Cleaning should be done only by a qualified person.
1. Remove back panel (electric) or lower access panel [gas)
2. Avoid damaging wares, thermostats, funnel or igniter
3. Remove lint from shaded area - see art- with a soft brush or vacuum cleaner
4. Replace panel. reconnect and
7