Whirlpool LE4900XS, LE4930XS, LG4931XS manual Starting Your Dryer

Page 4

Operating instructions

Starting Your Dryer

Before starting your dryer, be sure laundry is sorted and loaded properly (see your”Dryer Guide”). Be sure the door is tightly closed.

1. Select a CYCLE

2

Set

. TEMPERATURE SELECTOR

Turn the Control Knob either way to point to the cycle and time setting you want.

The dryer will start tumbling when you push the START Button,

3. Push the START Button

To stop and restart

the dryer

To stop the dryer, open the door (or turn the Control Knob to OFF). To restati the dryer, close the door, select cycle, if necessary, and push

START.

The setting can be changed at any time by turning the Control Knob to a new setting.

The Cycle Control Knob should point to an OFF area when the dryer

Is not In use. If the dryer is stopped before the cycle is finished, turn the Cycle Control Knob to an OFF area.

4

Image 4
Contents Automatic Dryers Parts and features Additional Safety Instructions For Your SafetyStarting Your Dryer StartSelecting a Cycle Drying timesEnd-of-cycle signal Load SizesMixed loads SuggestedLint Screen Electric DryersCleaning dryer interior Optional Installation Accessories Voltage RequirementsIf Your Dryer does not RUN Before calling for AssistanceIf Drying Time Seems Long If you need service If you have a problem%If you need FSP replacement part If you need assistance?Warranty