Gas Dryer

PRODUCT MODEL NUMBERS

WGD8200Y, WGD8400Y,

WGD8600Y, WGD8800Y

Side view with open door dimensions:

Back view:

Bottom view:

NOTE: Most installations require a minimum 5" (102 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements”.

Recommended Installation Spacing:

Spacing for recessed area or closet installation

All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides and rear.

■■ Additional spacing should be considered for ease of installation and servicing.

■■ Additional clearances might be required for wall, door, and floor moldings.

■■ Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilitation openings are acceptable.

■■ Companion appliance spacing should also be considered.