Hearth and Home Technologies 6000GLX-IPI-S owner manual Log Assembly LOGS-6000GLX LOGS-6000GLXLP

2101-910

G. Install the Log Assembly

Log Assembly: LOGS-6000GLX LOGS-6000GLXLP

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

STEP 1. CAUTION: Logs are fragile! Carefully remove the logs, grate and supporting cardboard from the inside of the fireplace See Figure 14.7.

STEP 2. Place the metal grate on top of the burner. Position the legs of the grate into the for- ward set of indentations in the burner top, sliding the grate forward. See Figure 14.8.

54

12

7	6
	3

Figure 14.7

HUMP

Figure 14.8

1

Figure 14.9 Front View

1

Figure 14.10 Top View

STEP 3. Log #1 NG (SRV2101-085): Log #1 LP (SRV2101-087):Log #1 is the left burning log. The air shut- ter in the end of the burner tube goes over the left brass orifice located behind the main burner. The left end of the log goes tight against the left refractory wall. See Figures 14.9 and 14.10.

54 Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. S • 12/08