2

Figure 14.11 Front View

2

Figure 14.12 Top View

STEP 4. Log #2 NG (SRV2101-086): Log #2 LP (SRV2101-088):Log #2 is the right burning log. The air shutter in the end of the burner tube goes over the right brass orifice located behind the main burner. The right end of the

log goes tight against the right refractory wall.

3

Figure 14.13 Front View

3

Figure 14.14 Top View

STEP 5. Log #3 (SRV2101-197):Place log #3 on top of the burner surface in front of the hump. Slide it back against the hump and the “V” notch in the bottom of the log rests into the second grate tine from the left.

4

Figure 14.15 Front View

4

Figure 14. 16 Top View

STEP 6. Log #4 (SRV386-716):Place log #4 on top of the left side of log #2. The bottom of this log has a slot in it that goes over the tab molded into the top of log #2. The other end of the log rests in the flat area on top of log #3.

Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R2101-900 Rev. S • 12/08

55

Page 55
Image 55
Hearth and Home Technologies 6000GLX-IPILP-R, 6000GLX-IPILP-S, 6000GLX-IPI-R, 6000GLX-IPI-S owner manual Front View