Whirlpool LE4900XM Lint Screen, Removal, Cleaning should be done, Only by a qualified person

Lint	screen
		The	lint	screen
		is inside the			dryer
		drum,	on	the
		back	wall.		Clean
		il before		each
		load.	A screen
		blocked		bv	lint
PIN	straight	can increase
		drying	time.
	out.

1.Use the finger holes to pull the lint screen straight out.

2.Lightly squeeze the body, as shown, while pulling the cover off.

3.Roll lint off the screen with your fingers. DO NOT rinse or wash the scree’n. Wet lint is hard to

remove.	Squeeze	body;
	pull cover	off.

4.Replace the cover on the body of the lint screen.

5.Push the lint screen straight back in until it clicks into place.

0

Lint

CAUTlON: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE,

PAM~D OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO FABRfCS AND DRYER PARTS, OR CREATE A CM& HAZARD.

removal

Lint can gather inside the dryer and create a fire hazard. This lint

should be removed every 2 to 3 years, or more often, depending on dryer usage.

ELECTRIC DRYERS GAS DRYERS

Cleaning should be done

WARNING:

l Avold electrical shock hazard - unplug power supply cord or turn off

electrical power.

l Avoid inJury or damage-do not put hands Inside cabinet.

l Make sure dryer is cool.

only by a qualified person.

1.Remove back panel (electric] or lower access door (gas).

2.Avoid damaging wires,

thermostats, funnel or igniter.

- -._.

3. Remove lent from snaaea area - see art-with a soft brush or vacuum cleaner.

4. Replace panel; reconnect and re-level dryer.