If dryer does not
operate properly...
If dryer will not operate, check the following to be sure that:
A. Electrical supply is connected.
B. House fuse is intact and tight or circuit breaker has not tripped.
C. Door is closed.
D. Controls are set in a running or “On” position.
E. Start button has been pushed firmly.
Part No. 3394023 Rev. A
01994 Whirlpool Corporation
Floor Damage
tloorSlide dryer onto cardboard or hardboard before movlng across floor.
Failure to do so may cause damage to coverlng.
When moving your dryer...
l Shut off electric supply to dryer.
l Disconnect power supply cord and tape securely to dryer.
l Tape the drum to the front panel.
l Tape the dryer door and lint screen. l Screw leveling legs all the way in.
Before having your electric dryer installed in your new home, check with a licensed electrician to confirm that the supply voltage matches the voltage specified on the serial/rating plate.
Prepared by Whirlpool Corporation
Benton Harbor, Michigan 49022
Printed on recycled paper. 10% post consumer waste/ 50% recovered materials.
Printed in U.S.A.