Diapers, baby
clothes
Elastic items
Fiberglass materials
Flame- retardant finishes
Napped items
lCorduroy, velveteen
Quilted, down- filled items
Snowsuits, jackets
lNylon,
Tinted, dyed or noncolotfast items
Towels
Washable knits
1 Wash and dry small items in a mesh bag or pillowcase for convenient
Ihandling.
/1, Dry according to manufacturer’s instructions.
/2. Remove diapers and cotton knit items while still slightly damp. They
1will feel softer, shrink less, and be easier to fold.
I
1Remove from dryer while still slightly damp.
Do not machine wash or dry fiberglass materials. Small particles can stick to fabrics washed or dried in following loads and cause skin irritation.
Some items have been treated with a
Dry separately or with similar colors to avoid lint transfer. Follow care label directions.
1.Dry according to manufacturer’s instructions.
2.Remove from dryer while there is still a trace of moisture.
3.Smooth, reshape and air dry before putting away.
Follow care label instructions.
1.Dry one at a time.
2.Remove from dryer and shake or fluff the item during the drying cycle.
3.Smooth and reshape before putting away.
Check label for fiber content, then follow care label directions.
Dry according to manufacturer’s instructions.
1.Dry garment for about 10 minutes. Remove and turn inside out. Dry fo 10 more minutes.
2.Remove from dryer immediately and hang on a nonrusting hanger to finish drying. This will help eliminate wrinkles.
Dry according to fabric, weight and care label instructions. Wipe the dryer drum carefully to remove any dye or lint that can be transferred to other loads. See “Cleaning the dryer interior” on page 11.
Select cycle according to fabric type. Some towels, particularly those made of a blend of synthetic fibers and natural fibers (polyester and cotton blends), may shed more lint than other towels causing your dryer’s lint screen to get full faster. Be sure to remove lint from the dryer lint screen before and after drying new towels.
Do not overdry knits. Overdying can cause shrinking and static cling.
1.Select cycle according to fabric and construction.
2.Turn synthetics and blends inside out when drying to avoid pilling.
3.Remove cotton and rayon knits while still slightly damp. Stretch into shape and lay flat to finish drying.
14