Miele W 1513 operating instructions Special features in the programme sequences

Page 23

Programme sequence

This machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary.

The programme sequences outlined in the chart are based on the basic programme with a full load. Extra options which can be selected have not been taken into account.

The display shows the stage the programme has reached.

Special features in the programme sequences:

Anti-crease:

At the end of every programme, with the exception of the Woollens programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. The door can be opened and laundry removed at any time during the anti-crease phase.

1)A second rinse is carried out when a temperature of 60°C to 95°C has been selected. A third rinse is carried out when a temperature below 60°C is selected.

A third/fourth rinse is carried out if:

–there is too much foam in the drum

–a spin speed lower than 700 rpm has been selected

–No u has been selected

2)A third rinse is carried out if: No u has been selected

23

Image 23

Contents Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents After sales service Consumption data Technical data Programmable functions Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the washing machineProgrammable functions Programme durationRunning your first programme Before using for the first timeSetting the language Reminder to remove transit barsDetergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionSort the laundry How to wash correctlyBrief instructions Select a programme Switch on the washing machine Load the drumSelect a temperature / spin speed Shut the door with a gentle swingPre-wash Select an extra optionsShort Water plusAdd detergent Start the programme Remove the laundry when the programme has finishedTo omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spinProgramme chart Dark garments Cold to 40C Max. load 3.0 kg Automatic Cold to 40C Max. load 3.5 kgShirts Cold to 60C Max. load 1.5 kg Denim Cold to 60C Max. load 2.0 kgMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Garment care label symbols Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programmeAdding or removing laundry after a programme has started Safety lockTo activate the safety lock To deactivate the safety lockAll purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenersWashing with several components Colour run and dye removers / dyes Fabric conditioners and liquid starchExternal casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaningDescaling the machine Cleaning the siphon and conditioner channelCleaning the detergent dispenser drawer housing To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy a Fault messages in the displayGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Blocked drain outlet Procedure for draining the machineRemove the lever Opening the drum door Optional accessories After sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Removing the transit fittings Installation surfaceTransporting the machine to its installation site Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetPlease note Building under a worktopWasher-dryer stack Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hoseExtension hose Maintenance and careConnection to the water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Language F Programmable functionsSuds cooling Water plusGentle action To enter the code To use the washing machine when the code is activatedCode To activate the codeBrightness Temperature unitBuzzer Keypad toneOff Standby display MemoryAnti-crease Not in current progAlteration rights reserved/1707/W Nr 972 290