Miele W 1513 Connection to the water supply, Maintenance and care, Extension hose

Page 49

Installation and connection

Connection to the water supply

The machine should be connected to a mains water supply in accordance with local and national safety regulations.

The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.

The machine is designed to operate with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.

Connection to the mains water supply should incorporate a mains stopcock with 3/4" thread. The stopcock should be fitted by a qualified plumber.

,The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.

The washing machine is not suitable for connection to a hot water supply and connection to a household water softener is not recommended.

Maintenance and care

Only use a genuine Miele hose should you ever need a replacement or extension. These are tested to withstand pressure of at least

7,000 kPa.

In order to protect the water inlet valve, the two dirt filters - one in the open end of the inlet hose, one at the inlet point in the machine must not be removed.

Extension hose

–Longer hoses 2.5 or 4.0 m in length are available from your Miele dealer or the Miele Spare Parts Department as optional extras.

49

Image 49

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents After sales service Consumption data Technical data Programmable functions Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the washing machineProgrammable functions Programme durationSetting the language Before using for the first timeReminder to remove transit bars Running your first programmeWashing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlySort the laundry Select a temperature / spin speed Switch on the washing machine Load the drumShut the door with a gentle swing Select a programmeShort Select an extra optionsWater plus Pre-washAdd detergent Start the programme Remove the laundry when the programme has finishedFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdProgramme chart Shirts Cold to 60C Max. load 1.5 kg Automatic Cold to 40C Max. load 3.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Garment care label symbols Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeTo activate the safety lock Safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenersRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchCleaning the detergent dispenser drawer Cleaning and careExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon and conditioner channelDescaling the machine To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy a Fault messages in the displayGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineBlocked drain outlet Opening the drum door Future updates PC After sales serviceAppliance guarantee Optional accessoriesFront view Installation and connectionRear view Transporting the machine to its installation site Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher-dryer stack Building under a worktopPlease note Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Language F Programmable functionsGentle action Water plusSuds cooling Code To use the washing machine when the code is activatedTo activate the code To enter the codeBuzzer Temperature unitKeypad tone BrightnessAnti-crease Standby display MemoryNot in current prog OffAlteration rights reserved/1707/W Nr 972 290