![](/images/new-backgrounds/1246787/24678763x1.webp)
Frequently asked questions
The program was canceled, the buzzer sounds and the "Start" button flashes.
Issue | Possible cause | Fix |
|
|
|
|
| – To turn off the fault message: |
|
| Open the drum door or press |
|
| and hold the "Pause/Hold to |
|
| Cancel" button until the fault |
|
| message goes out. |
|
|
|
The "FAULT" indicator | – The drain is | – Clean the drain filter and the |
"Drain" lights. | blocked. | drain pump. |
| – The drain hose is | – The maximum drain pump |
| too high. | height is 3 ft (1 m). |
|
|
|
The "FAULT" indicator | The water intake is | Possible fault: |
"Intake" lights. | blocked. | – Check if the water supply is |
|
| open all the way. |
|
| – the inlet hose is kinked. |
|
|
|
The "FAULT" | The waterproof | Call Technical Service. |
indicators "Intake" | system has |
|
and "Drain" light. | activated. |
|
|
|
|
The "STATUS" | There is a fault. | Start the program once more. |
indicators |
| If the fault message appears |
and "Main Wash" |
| again call Technical Service. |
light. |
|
|
|
|
|
28