Kompernass KH 1281 Setting the Steam Iron Temporarily Aside, Steam Ironing, Drip-Stop Function

Page 6

Important!

Should the care instructions for an article of clothing

not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article.

Check the care instructions on the labels of the clothing article whether and at which temperatu- re the clothing article may be ironed.

Set the appropriate temperature setting with the temperature control a.

The control light for the temperature w lights up. When the control light goes out, the chosen temperature w has been reached.

Wait until the temperature control light w goes out.

To moisten the material, press the button for the water fog o.

This function is suitable for very dry, crumpled or creased materials.

Setting the Steam Iron

Temporarily Aside

Fire Hazard!

Never leave the steam iron unattended when it is hot or switched on.

Set the temperature control a to the position "MIN“.

Only put the steam iron down on its standing foot e, fig. 2.

Putting the Steam Iron Away After Use

Remove the power plug from the power socket.

Empty the water reservoir and clean the gliding sole r.

Place the cool steam iron horizontally on a soft, clean base.

Steam Ironing

Set the steam control u to the desired steam strength setting.

Ironing with Steam Spray

The steam spray is especially suited to smoothing places in the laundry that are difficult to access.

Raise the steam iron a little way.

Press the steam spray button to release the steam spray i.

Drip-Stop Function

In conventional steam irons, it is possible that at too low ironing temperature water begins to trickle from the gilding sole r. However, this iron possesses a new technical feature, namely the DRIP-STOP func- tion, to switch off steam. The iron automatically swit- ches off the steam ejection at low temperatures. A “CLICK” noise is heard when this happens.

Using the temperature rotary controller a, set the required temperature.

Steam generation will continue as soon as this temperature level is reached.

- 4 -

Image 6
Contents Steam Iron Page Content Basic Safety Instructions Only pull on the power plug and never on the cordNever touch the cord or the power plug with wet hands Operating Elements Proper useBefore the First Use OperationSteam Ironing Setting the Steam Iron Temporarily AsidePutting the Steam Iron Away After Use Ironing with Steam SprayTechnical Data CleaningTroubleshooting Power Supply Voltage 230 V~/50 HzWarranty & Service DisposalImporter Kompernass Gmbh · Burgstrasse 21 · D-44867 Bochum