Miele W 3740 Fault messages in the display, Problem Possible cause Remedy Lights up, Flashes

	Problem solving guide
Fault messages in the display
Problem	Possible cause	Remedy ￿
￿ lights up in the	– The water outlet is	– Clean the drain filter and
display and	blocked or	the drain pump.
Drain fault	restricted.	– The maximum delivery
flashes.	– The drain hose has	head is 1 m.
	been fixed too high.
￿ lights up in the	– The water inlet is	Check whether
display and	blocked or	– the stopcock is opened
Water inlet	restricted.	properly.
fault		– the inlet hose is kinked.
flashes.
		– the water pressure is too
		low.
￿ lights up in the	The water protection	Call the Service Department.
display and	system has reacted.
Waterproof
fault
flashes.
￿ lights up in the	There is a fault.	Start the programme again.
display and		If the fault message appears
Technical		again, contact the Service
fault		Department.
flashes.
Anti-crease	Excessive foam has	Use less detergent next time
Chk detergent	built up during	and follow the manufacturer's
flashes in the display.	washing.	instructions on dosage given
		on the packaging.

￿To switch off the fault message: Switch the machine off with I-On/0-Offbutton.

35