Miele W 3740 Connection to the water supply, Maintenance and care, Extension hose

Page 50

Installation and connection

Connection to the water supply

The machine should be connected to a mains water supply in accordance with local and national safety regulations.

The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.

The machine is designed to operate with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.

Connection to the mains water supply should incorporate a mains stopcock with 3/4" thread. The stopcock should be fitted by a qualified plumber.

￿The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.

The washing machine is not suitable for connection to a hot water supply and connection to a household water softener is not recommended.

Maintenance and care

Only use a genuine Miele hose should you ever need a replacement or extension. These are tested to withstand pressure of at least

7,000 kPa.

In order to protect the water inlet valve, the two dirt filters - one in the open end of the inlet hose, one at the inlet point in the machine must not be removed.

Extension hose

Longer hoses 2.5 or 4.0 m in length are available from your Miele dealer or the Miele Spare Parts Department as optional extras.

50

Image 50
Contents Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Blocked drain outlet Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsReminder to remove transit bars Before using for the first timeSetting the language Running your first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentSort the laundry How to wash correctlyBrief instructions Select a programme Switch on the washing machine Load the drumSelect a temperature / spin speed Water plus Select an extra optionsShort Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdMinimum iron 30C to 60C Max. load 3.0 kg Programme chartCottons 30C to 95C Max. load 6.0 kg Delicates Cold to 60C Max. load 2.0 kgAutomatic Cold to 40C Max. load 3.5 kg Silks Cold to 30C Max. load 1.0 kgExpress Cold to 40C Max. load 3.0 kg Shirts Cold to 60C Max. load 2.0 kgSpin Outerwear Cold to 40C Max. load 2.0 kgDark garments Cold to 40C Max. load 3.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeTo deactivate the safety lock Safety lockTo activate the safety lock Adding or removing laundry after a programme has startedAll purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenerWashing with several components Fabric conditioners and liquid starch Colour run and dye removers / dyesExtra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Descaling the machineCleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFlashes Fault messages in the displayProblem Possible cause Remedy Lights up Flashes Lights upGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Blocked drain outletOpening the drum door Appliance guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Removing the transit bars Installation surfaceInstalling the washing machine Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FSuds cooling Water plusGentle action To activate the code To use the washing machine when the code is activatedCode To enter the codeKeypad tone Temperature unitBuzzer BrightnessAnti-crease Standby displayMemory Not in current progOptional accessories CareCollectionLiquid detergent For Delicates UltraWhite detergentUltraColor detergent for coloured garments Fabric conditionerPage Alteration rights reserved/0309/W Nr 171 180