Miele W 1613 operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 52

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

52

Image 52

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Blocked drain outlet Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsBefore using for the first time Setting the languageReminder to remove transit bars Running your first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentBrief instructions How to wash correctlySort the laundry Select a temperature / spin speed Switch on the washing machine Load the drumSelect a programme Select an extra options ShortWater plus Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdProgramme chart Automatic Cold to 40C Max. load 3.5 kg Shirts Cold to 60C Max. load 2.0 kgDenim Cold to 60C Max. load 3.0 kg Dark garments Cold to 40C Max. load 3.0 kgExtra options Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeSafety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenerRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesCleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon and conditioner channelDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFault messages in the display Problem Possible cause Remedy Lights upFlashes Flashes Lights upGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Blocked drain outletOpening the drum door After sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Transporting the machine to its installation site Installation surfaceRemoving the transit fittings Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a worktopPlease note Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FGentle action Water plusSuds cooling To use the washing machine when the code is activated CodeTo activate the code To enter the codeTemperature unit BuzzerKeypad tone BrightnessStandby display MemoryAnti-crease Not in current progOptional accessories CareCollectionUltraWhite detergent UltraColor detergent for coloured garmentsLiquid detergent For Delicates Fabric conditionerPage Alteration rights reserved/0309/W Nr 217 950