Miele W 1613 Code, To activate the code, To enter the code, To deactivate the code

Page 58

Programmable functions

Code

A code can be used to lock the electronics on the washing machine to prevent it being used without your knowledge.

When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated.

Code ...

￿Press the Start/Stop button.

To activate the code

Activate

￿Press the Start/Stop button.

The display will now request that a code is entered.

To enter the code

The code is 125 and cannot be altered.

O__ __

￿Turn the programme selector until the first number appears in the display.

￿Confirm your selection of the number by pressing the Start/Stop button.

￿Repeat the process until all three numbers have been entered.

1 2 5

￿Press the Start/Stop button.

The following will appear in the display:

Code activated

Once the machine is switched off, it can only be used again if the code is entered.

To use the washing machine when the code is activated

When the machine is switched on again, the display will request the code.

￿Enter code 125 as described above and confirm the entry.

The washing machine is now unlocked and ready for use.

To deactivate the code

Make sure the washing machine is switched off and the door is properly closed. Press the Start/Stop button and keep it pressed in whilst you press the l-On/0-Offbutton in.

As soon as . . .

O__ __

. . . appears in the display, release the Start/Stop button.

￿Now enter the code and press the Start/Stop button.

￿Select Code and confirm Deactivate.

58

Image 58
Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Blocked drain outlet Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the washing machine Control panelProgramme duration Programmable functionsReminder to remove transit bars Before using for the first timeSetting the language Running your first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentBrief instructions How to wash correctlySort the laundry Select a temperature / spin speed Switch on the washing machine Load the drumSelect a programme Water plus Select an extra optionsShort Pre-washAdd detergent Remove the laundry when the programme has finished Start the programmeRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdProgramme chart Denim Cold to 60C Max. load 3.0 kg Automatic Cold to 40C Max. load 3.5 kgShirts Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgExtra options Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeTo deactivate the safety lock Safety lockTo activate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenerRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesExtra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon and conditioner channelDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startFlashes Fault messages in the displayProblem Possible cause Remedy Lights up Flashes Lights upGeneral problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Blocked drain outletOpening the drum door Appliance guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Transporting the machine to its installation site Installation surfaceRemoving the transit fittings Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a worktopPlease note Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseConnection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Language FGentle action Water plusSuds cooling To activate the code To use the washing machine when the code is activatedCode To enter the codeKeypad tone Temperature unitBuzzer BrightnessAnti-crease Standby displayMemory Not in current progOptional accessories CareCollectionLiquid detergent For Delicates UltraWhite detergentUltraColor detergent for coloured garments Fabric conditionerPage Alteration rights reserved/0309/W Nr 217 950