Using the dryer
6. Start the program
^Press the "Start/Stop T" button.
Once the program starts, the current cycle of the program will be indicated in the "STATUS" display.
7. At the end of a program
The
If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details.
^Press the "Door" button.
^Open the door.
^Remove the laundry.
^Check that the drum is empty.
^Clean the lint filter after each use (see "Dryer care").
^Close the door.
^Press the "On/Off" button to turn off the dryer.
11