Miele T1403 operating instructions What if the dryer will not run?, How do I prevent static cling?

Page 17

 

Frequently asked questions

 

 

 

 

What if the dryer will not run?

 

Possible fault

Fix

The "Start/Stop T" button was not

Make sure the dryer is on. Press the "Start/

pressed.

Stop T" button to begin the drying program.

 

 

The circuit breaker tripped or the

Make sure the dryer is plugged in or reset

dryer is unplugged.

the circuit breaker.

 

 

The door is not closed.

Close the door properly.

 

 

How do I prevent static cling?

Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.

What if the drum light does not come on?

Possible fault

Fix

The bulb may be bad or burned See "Changing the light bulb." out.

What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?

Possible fault

Fix

 

 

The child lock is activated.

Deactivate the child lock. See "Child Lock."

 

 

What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?

Possible fault

Fix

 

 

The drum is empty.

Load laundry into the dryer. The dryer will not

 

operate when the drum is empty. Single

 

items should be dried with "Sturdy" or a

 

timed program and dry items in the "Fluff"

 

program.

 

 

What if the "Filter/Vent" fault indicator is lit?

Possible fault

Fix

 

 

The lint filter is clogged.

Clean the lint filters. See "Dryer care".

 

 

The exhaust hose or the

Remove lint and check the exhaust system

connection is clogged with lint.

for blockages.

 

 

The air supply in the room is

Open a window or door to increase airflow.

insufficient.

 

 

 

17

Image 17
Contents Operating Instructions Vented Dryer 1403 Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Program When to useTurbo Select a drying option if neededFull load GentleSelect the buzzer if desired Adjusting the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the dryer will not run? What if the Filter/Vent fault indicator is lit?How do I prevent static cling? What if the drum light does not come on?What if the program runs too long or stops? Frequently asked questionsWhat if the laundry is not dry enough? What if water has collected around the drum opening?Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Disposal of an appliance Caring for the environmentDisposal of the packing materials Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationDetermining the position of the exhaust connection Changing the position of the exhaust connectionInstallation tips Wall connection with rigid pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthElbow 90 sharp Smooth metal ductConcertina bend Wall vent or window ventTotal duct length Page Page All rights reserved
Related manuals
Manual 3 pages 50.36 Kb