Dryer care
Cleaning the lint filter
The lint filter must be cleaned before or after every program.
^Open the door and remove the lint filter.
^Wipe the lint off the filter with your hand, do not use any sharp objects!
^Any lint remaining in the hollow part of the door can be removed through the gap at the bottom with a dust brush or vacuum.
^Return the lint filter and close the door.
The lint filter can be rinsed with hot water if necessary.
^Dry the lint filter before putting it back in place.
Before cleaning the tumble dryer, disconnect the machine from the power supply.
Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface.
Cleaning the exterior and the control panel
^The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.
^Wipe dry using a soft cloth.
Cleaning the drum and stainless steel parts
^Stainless steel surfaces can be cleaned using a
^Wipe dry using a soft cloth.
15