INSTALLATION INSTRUCTIONS
Installation
The machine should be level to ensure safe and proper operation. Minor dis- crepancies do not, however, have an adverse effect on operation.
The machine can be leveled by turn- ing the legs clockwise or counter- clockwise as necessary.
Turn the counternuts up and tighten against the bottom.
A gap of 10 mm must be main- tained between the bottom of ma- chine and the floor. This gap must not be blocked by deep pile carpet, plinths etc., as this will prevent a suf- ficient intake of cold air.
Where to install the machine
The space required by the vent duct should be taken into consider- ation when calculating the distance between the machine and a wall or other appliances.
The tumble dryer can also be placed on top of a Miele washing machine (ca- pacity 6 kg) for a stacked installation.
An appropriate stacking kit is required and can be obtained from your Miele dealer, or the Miele Parts Dept.
20