Karcher K 260 M specifications Operating Instructions

Page 5

OPERATING INSTRUCTIONS

Step 1 Connect the high pressure hose to the unit’s high pressure outlet.

Step 2 Insert the spray wand of your choice into the wand extension. Push in and turn clockwise to lock spray wand in place.

Step 3 Connect garden hose to unit’s water inlet.

Step 5 Plug the power cord into the power outlet. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 4 Connect garden hose to the cold water source and turn water on completely.

Step 6 Turn on the pressure washer. The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.

Image 5

Contents High Pressure Washer Operator Manual Never Model K 260 M OverviewGround Fault Circuit Interrupter Protection Important Precautions Read FirstThis Product Is Double Insulated Extension CordsWater Supply Cold Water Only Important PrecautionsAssembly Instructions Operating Instructions High 15º Using the AccessoriesLow 40º Als, siding painted surfaces, decks orFollowing Karcher detergents are available Working with DetergentTaking a BREAK... five minutes or more Shutting Down & CLEAN-UPWinterizing and LONG-TERM Storage StepDeck Cleaning Cleaning TipsHouse Siding Cement Patios Brick and StoneOptional Cleaning Accessories Cleaning TipsBarbecue Grills, Outdoor Power Equipment Gardening Tools Patio & Lawn FurnitureSymptom Cause Solution Motor will not start TroubleshootingTroubleshooting