Kambrook K1450, SpeedSteam Iron KI450/KI480 manual Steam Ironing, To Operate the Steam Control

Page 8

Operating Instructions continued

Stand the iron on its heel and turn the Temperature Control to MIN.

Plug the power cord into a 230V or 240V power outlet and switch on. The Power Indicator light will illuminate while the iron is plugged into an outlet and switched on.

NOTE: for KI480 only, the Power Indicator light will remain on even if Auto Off has been activated.

Select the temperature setting required by rotating the Temperature Control dial so that the desired setting is aligned with the Temperature Indicator.

Your Kambrook iron is now ready for use.

Caution: The iron incorporates a thermal safety fuse to protect the iron from over-heating. However the iron should not be left unattended while it is connected to the power outlet. Special care should always be taken when there are children in the home/ vicinity of the iron.

Steam Ironing

When filling the iron with water, ensure that the iron is unplugged. Set the Steam Control to the MIN position and holding the iron at an angle, use the water cup supplied to fill the water tank. Never exceed the maximum water level as indicated (MAX) on the side of the water tank.

Tap water can be used in your Kambrook SpeedSteam Iron unless it is particularly hard, in which case it is recommended that distilled or demineralised water be used.

To Operate the Steam Control

As per the indications on the Temperature Control and in Table A (see section ‘Setting the Temperature’) steam ironing is only possible at higher ironing temperatures, indicated with Cotton/ Linen on the Temperature Control.

Plug the power into a 230V or 240V power outlet and switch the power on. The Power Indicator light will illuminate while the iron is plugged into an outlet and switched on.

NOTE: for KI480 only, the Power Indicator light will remain on even if Auto Off has been activated.

Set the Temperature Control to the required position within the steam range.

Set the Steam Control (on top of the handle) to the required setting.

Your Kambrook iron is now ready for use.

Important: If the iron is set to a low temperature on the Temperature Control (i.e. synthetic or silk) and also on any of the steam control settings, there may

be leakage from the soleplate. This is due to the iron temperature not being high enough to vaporise the water and create steam.

Therefore, ensure that the steam control is always set to correspond with the setting on the temperature control as seen in Table A

(see section ‘Setting the Temperature’).

8

80_IB_D12.indd 8

5/12/12 10:28 A

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Instruction Booklet Please retain your instruction book for future use Contents Important Safeguards For Your Kambrook SpeedSteam Iron Important Safeguards For All Electrical Appliances Misuse may cause injuryYour Kambrook SpeedSteam Iron KI480 shown Not ShownSetting the Temperature Operating InstructionsTable a Before First UseSteam Ironing To Operate the Steam ControlHow To Use Shot Of Steam Using the Fine Mist SprayVertical Steam Shot Dry IroningAfter Each Use Safety Auto Off KI480 OnlyAnti-Drip System Care and Cleaning Cleaning the Soleplate and ExteriorPrivate Bag 94411 Botany, Manukau Auckland 2163 New Zealand

SpeedSteam Iron KI450/KI480, K1450 specifications

The Kambrook K1450 SpeedSteam Iron KI450/KI480 is engineered to provide efficient and effective wrinkle removal for a variety of fabric types. This iron incorporates advanced technologies and features that enhance the ironing experience while ensuring optimal results.

One of the standout features of the SpeedSteam Iron is its powerful steam output. With a continuous steam performance, it delivers a steady stream of steam to penetrate fabrics deeply, making it easier to tackle stubborn wrinkles. The vertical steam function allows users to steam hanging garments, curtains, and upholstery, providing versatility and convenience.

The Kambrook K1450 boasts a stainless steel soleplate that ensures a smooth glide across different fabric surfaces. Designed for durability, this soleplate is scratch-resistant, allowing users to maintain a pristine appearance over time. The pointed tip of the iron also enables precise ironing in hard-to-reach areas, such as collars and seams.

For added safety, the SpeedSteam Iron features an automatic shut-off function. This feature activates when the iron is left unattended, providing peace of mind and energy efficiency. Additionally, the iron includes a water tank with a generous capacity, reducing the need for frequent refills during extended ironing sessions.

The Kambrook K1450 is designed for user convenience with its lightweight and ergonomic design. The comfortable grip allows for extended use without fatigue, making it ideal for everyday ironing tasks. The heat indicator light informs users when the iron is ready for use, ensuring optimal ironing temperature.

Another key characteristic of this model is its anti-drip system. This feature prevents water leakage at lower temperatures, eliminating the risk of water spots on garments. The easy-to-fill water tank and self-cleaning function further enhance the maintenance of the iron, keeping it in good working condition for years to come.

In summary, the Kambrook K1450 SpeedSteam Iron KI450/KI480 is a reliable and efficient ironing solution. With its powerful steam output, durable stainless steel soleplate, safety features, and user-friendly design, it meets the demands of modern households. Whether for daily clothing maintenance or touch-ups before special occasions, this iron delivers superior performance and exceptional results.
Top Page Image Contents