Description
AIron on/off switch.
BBoiler on/off switch.
CBoiler operation LED.
DIron operation LED.
ESteam pressure indicator LED.
FWater filling cap.
GMains connexion.
HIron steam switch.
JIron thermostat control.
KIron thermostat LED.
LIron housing.
Tips and safety warnings
-Please read these instructions carefully before using the appliance and keep them for future reference.
-Unpack the appliance and check it is in perfect condition and working order.
-This device has been designed for household use, not for commercial use.
-Do not leave the appliance without supervision if you are not going to use it immediately. This will save energy and prolong the working life of the appliance.
-Keep the appliance out of the reach of children.
-The appliance must not be connected to the mains while the boiler is being filled (Fig. 1).
-Before connecting the appliance to the mains, ensure the supply voltage is the same as that marked on the appliance.
-The water filling inlet must not be open during operation.
-This appliance must be connected to an electrical socket with an earth connection.
-Any improper use or failure to comply with the instructions for use will invalidate the warranty and free the manufacturer from any liability concerning the appliance.
-IF THE IRON IS IN ITS HOUSING AT MAXIMUM TEMPERATURE FOR A LONG TIME, THIS MAY CAUSE ALTERATIONS TO ITS COLOUR, BUT THIS HAS NO EFFECT ON THE PROPER OPERATION OF THE APPLIANCE.
-The appliance must be used and placed on a flat, stable surface
-When placing the appliance on its support, make sure the surface on which the support is fitted is stable.
-Do not use the appliance if it has been dropped, if there are visible signs of damage or if it leaks.
Before using the appliance for the first time
This professional iron works with tap water. However, the use of distilled water is recommended in areas with a high lime level in the water. Some parts of the iron have been slightly greased. They can therefore give off steam on first use, but this steam will disappear after a short time.
Practical tips
-Keep the sole plate smooth, do not apply it to metallic objects (i.e., to the
-Fit the iron in its housing (L) for transport and storage, in order to improve its stability.
-To avoid burns, do not lean Bravissimo 2 Pro’s iron on its back
MW_EX23805 SteamStation_IM.indd 3
7/25/2007 2:02:50 PM