How to fill the boiler while ironing
To fill the boiler, proceed as follows:
-Eliminate steam pressure from inside the boiler by switching on the steam switch (H) (Fig. 5).
-Turn off the boiler (B) and iron (A) switches.
-Unplug the appliance from the mains.
-Carefully unscrew the cap (F) to let the residual steam out of the boiler.
-Wait for some minutes and carefully pour 1l of water into the boiler using a jug (Fig. 1).
-Carefully close the cap (F) again, screwing it to the end.
Vertical ironing
It is possible to iron hanging curtains, garments on their own hangers... (Fig. 6)
Fig. 6
-Adjust the iron thermostat control (J) to the maximum temperature.
-Iron from top to bottom and press the iron steam switch (H).
Important: For cotton and linen clothes, it is recommended to put the base of the iron in contact with the fabric. For more delicate fabrics, it is recommended to keep the base of the iron at a distance of some centimetres.
Dry ironing
-Connect the professional iron to the mains.
-Turn on the iron switch (A).
-Set the iron temperature with the thermostat control (J), depending on the fabric to be ironed.
-Clean the base of the iron while it is still hot, using a damp cloth, after each use.
-The rest of the appliance can also be cleaned using a damp cloth. Never submerge the appliance in water or any other liquid, or hold it under a running tap. Do not use solvents or abrasive products to clean it.
Care and Cleaning
•Before cleaning the iron, ensure it is disconnected from the power supply and has completely cooled down.
•Deposits and other residues on the soleplate can be removed with a rough cloth soaked in a vinegar/water solution, or methylated spirits.
•The housing/body may be wiped with a damp cloth and then polished with a dry one.
•Dot not use abrasives on the soleplate.
•Keep the soleplate smooth: avoid hard contact with metal objects.
•NOTE: Ironing dirty fabric or fabric not rinsed fully will result in the iron sticking and dirt accumulating on the bottom of the soleplate, as will a iron set at too high a temperature for the relevant fabric.
After each ironing
-Switch off the professional iron by pressing switches (B) and (A).
-Unplug the network connection cable (G) from the mains.
MW_EX23805 SteamStation_IM.indd 5
7/25/2007 2:02:51 PM