•Plug in the iron and select the temperature by turning the thermostat dial. If there is water in the reservoir, make sure the steam regulator is set to OFF position. Wait until the indicator light goes off, showing that the required temperature has been reached.
STEAM IRONING
•Fill water in the iron as per the
•Unwind the power cord.
•Plug the appliance in the socket.
•Set the thermostat dial to MAX position, otherwise water may leak from the soleplate.
•Put the iron on its heel to warm up, until the indicator light goes off.
•Set the steam regulator correctly, increase the steam output by rotating the steam regulator anticlockwise, otherwise decrease the steam output by rotating it clockwise.
Caution: Set the temperature dial within the steam range ('' or ''). If temperature setting is too low, water may drip from soleplate.
Check the garment label before ironing because some clothes may be damaged when exposed to steam or water. Typically, synthetic fabrics, nylon, synthetic silk and silk cannot be ironed with steam otherwise it may damage the fabric.
BURST OF STEAM / VERTICAL STEAM
The burst of steam feature provides additional steam for removing stubborn creases.
•Set the thermostat dial button to MAX, wait until the indicator light goes off.
•Release the steam by pressing the steam button.
•Wait for several minutes and let the steam penetrate through the fabric, and then release more steam through pressing this button again.
7 | DA31066 / 31067 - 091112 |
Assembly page 7/16