6BURST OF STEAM
6 |
MTo remove stubborn wrinkles or press in a sharp crease, use the burst of steam button.
MPress the button firmly, a strong burst of steam penetrates deep into the fabric.
MLeave an interval of at least four seconds between pressing the burst of steam button.
MWith water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (●●●).
7VERTICAL STEAM
7 |
MThe iron can also be used vertically. This is especially useful for getting creases out of hanging clothes, curtains, tapestries, etc.
MTo steam vertically, press the burst of steam button while holding iron in the upright position.
Warning:
Never iron clothes while they are being worn.
POINTS TO NOTE
If the iron has not been used for a long time (e.g. several weeks) the steam channels should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute. Also activate the burst of steam button several times.
8DRY IRONING
8 |
|
| Self |
min | ean |
max Cl |
MSlide the variable steam control fully to the left (min.). We recom- mend dry ironing with an empty water tank to be sure there are no drips.
AFTER IRONING
MUnplug the iron. Set the variable steam control to max. and empty any water left in the tank. Then set the variable steam control to min. and leave the iron to cool.
MFor easy storage the cord can be wound loosely around the heel once the iron has cooled down completely.
MTo protect the soleplate always store the iron on its heel.
Important:
Always empty the water tank when ironing is finished.