Rowenta Werke manual Turning on the Steam Generator, Understanding the Control Panel

Page 4

(3)

4.Replace it securely on the base and push down to lock in place

(3).

The steam generator is designed to operate using tap water. Please review WATER RECOMMENDATIONS section for additional water information.

TURNING ON THE STEAM GENERATOR

(2)

(1)

(4)

1.Completely remove the power cord from its storage space before plugging in.

2.Press on the on/off switch (located on the front of the appliance) (1) the green light on the control panel flashes and the boiler heats up (2). It will take approximately 2 minutes to heat. The green “steam ready” light will stop flashing (4).

UNDERSTANDING THE CONTROL PANEL

MFlashing green lightÊ : the water is heating up in the boiler.

MContinuous green lightÊ : steam is ready for use.

MContinuous red lightÊ : the water tank is empty.

MBoiler reset button: to be activated after each refill.

USING YOUR STEAM GENERATOR

Warning: Steam produced is very hot. To avoid burns and scalding, never iron or steam clothes while they are being worn.

1. Set the temperature control dial for the type of fabric being ironed

(5).

(5)

Synthetics (low temperature)

Silk/Wool (medium temperature)

● ● Cotton/Linen (high temperature)

2. The iron temperature indicator turns on.

Image 4
Contents Expert Instructions for Use Important Safety Instructions Helpful Hints Before USEFilling the Water Tank Turning on the Steam Generator Using Your Steam GeneratorUnderstanding the Control Panel Filling During USE Type of fabricCleaning and Maintenance Vertical Steam IroningAfter Ironing Leave the iron to cool down for approximately 60 minutesIron soleplate Base unitÊRinsing OUT the Boiler Be carefulWater Recommendations Troubleshooting Problems Possible causes SolutionsRowenta Inc Medford, MA