(6)
3.Adjust the steam control dial located on the control panel (6), eg. less steam for low temperatures.
Be carefulÊ ! The steam generator is ready when the temperature indicator light goes out and when the green “steam ready“ light stays on.
With delicate fabrics (● setting), turn the steam output control dial to the minimum position and press the steam control button (under the handle of the iron) intermittently to avoid water droplets appearing with the steam.
Type of fabric | Iron thermostat | Steam control |
| setting | dial setting |
Synthetic
Viscose
Polyester
● (low temperature)
Silk
Wool
● ● (medium temperature)
| Cotton | |
| Linen | |
| ● ● ● (high temperatures) | |
(7) | 4. To obtain steam, press on the | |
steam button beneath the iron | ||
| ||
| handle and keep it pressed (7). | |
| The steam will stop when you | |
| release the button. We | |
| recommend pressing and | |
| releasing the steam button at | |
| regular intervals of 15 seconds. |
Note: It is normal for the steam connection cord to become warm while in use.
FILLING DURING USE
The red “water tank empty” light turns on when there is no water left to produce steam.
1. Remove the water tank and fill. See FILLING WATER TANK section.
2. Ensure the water tank is replaced securely and press the boiler reset button located on the control panel to continue your ironing
(8).
(8)