Morphy Richards 40743 manual Electrical Requirements, Instructions for USE, Temperature guide

Page 3

RN40743 MUK Rev6:40715 rev3 27/03/2009 14:18 Page 3

When ironing is complete, remove the plug from the socket, empty any remaining water from the tank, and allow to cool before storage.

If you drop or severely knock your iron, this could cause internal damage even if the outside appears alright. Have it checked by a qualified electrician.

It is recommended that you use up one beaker of water by operating your iron’s steam and shot of steam functions before ironing any clothes, as some dripping may occur while your iron’s steam system is activated.

ELECTRICAL REQUIREMENTS

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).

If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.

WARNING: A damaged or severed mains cable fitted with a plug should never be connected to the mains supply. It must be destroyed, as a damaged cable becomes hazardous if connected to a power socket.

Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted.

WARNING: This appliance must be earthed.

INSTRUCTIONS FOR USE

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code.

Symbol

 

 

 

 

 

(120°C Max) Cool

(160°C Max) Warm

(210°C Max) Hot

‘Max’ Setting

Control knob

Do not iron

 

 

 

positions

at all

 

 

 

Fabric

Nylon, Acetates

Wool, Polyester

Cotton, Linen

 

 

e.g. Acrilan

mixtures e.g.

Rayon, Rayon

 

 

Courtelle, Orlon

Polyester/Cotton

mixtures,

 

 

Triacetates, e.g.

 

e.g. Rayon/Linen

 

 

Tricel/Polyester

 

 

 

Ironing

Iron on wrong side,

 

if moisture required

 

use damp cloth

 

(Not Acetate)

Fabrics requiring this setting usually require steam pressing for heavy cotton, denim etc.

With water in tank

 

Dry and spray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steam/spray/shot of steam

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Self clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Without water in tank

 

 

 

 

Dry ironing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For details of other Morphy Richards products, please see our website:

3

Image 3
Contents ‘Advanced Finish’ iron steam/spray/shot/press Important Safety Instructions Temperature guide Electrical RequirementsInstructions for USE Before USE Components of Your IronDry ironing Features of Your IronTemperature Control B Filling aMaintenance Helpline To clean a ceramic coated soleplateTo clean the exterior Emptying Storing HExclusions Your TWO Year Guarantee