40692 rev2 20/6/08 14:32 Page 4
⁄ Â ‰
¤
‹
›
„
fi
|
| ‡ · ‚ |
fl | ||
Ê
FILLING A
1 Make sure that the iron is |
not plugged in, then set |
the steam selector switch |
‹ to the ‘0’ position |
before filling the iron with |
water. |
400
350
300
COMPONENTS OF YOUR IRON
⁄Shot of steam button
¤Spray button
‹Variable steam switch
›Filling hole with cap
fiSpray nozzle
flSoleplate
‡
·Temperature console
‚Water tank (illuminated on some models)
„Life long
‰Auto
ÂTemperature selection button
ÊFilling beaker
BEFORE USE
Sort out the items to be ironed according to the type of fabric. This will minimise the frequency of temperature adjustment for different garments.
Note: The steam facility should only be used on garments which are suitable for ironing at the 3 dot and MAX setting.
Textiles and clothes are supposed to carry ironing instructions. If they don’t, you should follow the fabric guide on page 3, but be sure to test the temperature by ironing the hem of the garment or similar area first.
If you adjust the temperature selection button  down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing.
Delicate fabrics such as silk, wool, velour, etc, are best ironed with an ironing cloth to prevent shine marks.
2 Lift up the filler cap › and |
pour water through the |
hole into the water tank ‚, |
using the beaker provided |
Ê A. |
350ml of water fills the |
tank. After filling, replace |
the fill cap. In hard water |
areas, the use of distilled |
or demineralised water is |
recommended. |
WARNING: Never use |
battery topping up fluid |
or water containing any |
substances like starch, |
or sugar, or defrosted |
water from a refrigerator. |
3 Always pour out the |
remaining water after use. |
WARNING: When filling |
your iron with tap water, |
always use the beaker |
provided. Never fill |
directly under the tap. |
A
|
|
4 | UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 |