Morphy Richards 40692 manual Features of Your Iron

Page 5

40692 rev2 20/6/08 14:32 Page 5

Temperature

B

Increase

Decrease

control B

 

 

temperature

temperature

 

 

• Default setting + 3 dot (cotton).

 

 

 

• To increase the temperature,

 

 

 

press the arrow .

 

 

 

• To decrease the temperature,

 

 

 

press the arrow .

 

 

 

• The temperature console · will

 

 

 

flash to indicate that the iron

 

 

 

has not yet reached the correct

 

 

 

temperature.

 

 

 

• Once the correct temperature

 

 

 

has been reached, the light will

 

 

 

stop flashing and there will be

 

 

 

one ‘beep’ to signal that the iron

 

 

 

is now ready for use.

 

 

 

FEATURES OF YOUR

 

 

 

IRON

 

 

 

Dry ironing

 

 

 

You can use your iron as a dry iron only. Make sure the variable steam control is set to the ‘0’ symbol.

Any temperature setting may be used depending on the garment. The spray feature may be used, providing there is water in the tank (see filling section). You do not need to put any water in the tank when dry ironing only.

Spray C

Press the spray button ¤ and aim the spray of water at stubborn creases. You can do this whilst dry ironing, providing there is water in the tank. When using the water spray, it may be necessary to push the button a few times to get the spray pump primed.

Variable steam D

Fill the iron with water, as described in ‘Filling’ on page 4, and insert the plug into the electrical socket.

The steam output can be varied from low to high by moving the variable steam control D.

The steam facility should only be used on garments which are suitable for ironing at the 3 dot and MAX setting.

Shot of steam E

Press the shot of steam button to obtain a burst of extra steam for ironing out creases in heavy material such as denim etc.

The shot of steam can be used whilst dry ironing, providing there is water in the tank, and the temperature control is set within the steam range.

Do not use the shot of steam at temperatures below the steam range shown on the control dial.

Note: For optimum steam quality, do not operate the shot more than three times in succession.

C

Steam off

D

‘MAX’ steam

 

 

E

5

Image 5
Contents Semi-electronic iron Safety Instructions Instructions for USE Temperature guideElectrical Requirements Before USE Filling aComponents of Your Iron Features of Your Iron Maintenance To clean a coated To clean a stainless steel soleplateTo clean the exterior Emptying and storingExclusions Your TWO Year Guarantee